What is the Use Instructions of Combat Tourniquet by Double-hand Operation on Legs Bleeding?

1. When arounding the legs, let the free end through the inside button hole
2. Back cross the tape through outer button hole, fix the band with friction
3. Tighten the adhesive tape, reversely tightened
4. Rotating the rod until the bleeding stopped
5. Stuck the rod with the fixed slot, then bleeding have been controlled
6. Lock the screw rods with the fixed clasp

Usage of friction buckle

When manually operated a tourniquet or when the tourniquet is serious polluted, use special design of friction belt buckle to fix the band.

a. Let the adhesive tape free end through buckles inside

b. Back through the outer button hole, so the adhesive tape can be firmly positioning

c. Tighten the adhesive tape, reversely tightened

Cautions

a. Disposables, single use

b. This tourniquet is used by medical first-aid trained personnel.

c. Read the instructions before using.

d. Medical waste disposal requirements: according to local regulations.

e. According to medical wastes treatment, not discarded.

Storage

a. Under the storage conditions, the period of validity is 5 years.

b. Generally should be stored in a temperature 5-30 degrees Celsius, relative humidity no more than 80%, non-corrosive gases and ventilated interior.
 

For more details about the products, please refer to
https://www.chinabandages.com/first-aid-accessories/first-aid-combat-tourniquet.html